Sealite News
5th September 2011
NEW PRODUCT RELEASE: Aquamoor-1000
The Sealite Aquamoor Mooring Buoys are designed to offer customers long life and rugged service, and are suitable for most locations.
The Aquamoor range is available in 650mm and 1000mm diameter. The mooring buoys are rotationally-molded from UV-stabilised virgin polyethylene to a 7mm wall thickness, and are foam filled with closed-cell polyurethane to prevent water ingress in the unlikely event of damage to the outer layer.
The large galvanised mooring tube with 82.5mm ID will accept mooring chain of up to 20mm in diameter. The mooring tube is not molded into the buoy but slides into a tubular section that runs down the centre of the buoy enabling the tube to be replaced at any stage during the product’s service life.
Sealite’s Aquamoor Mooring Buoys are capable of supporting substantial loads, and are available in a range of colours for clear visibility.
To learn more about Sealite's Aquamoor Series, click HERE. To discuss your requirements with a Sealite representative, call TODAY on +61 (0)3 5977 6128