The Sealite range of SL-MB2600 mooring buoys are designed to offer customers a long service life and are suitable for most locations.
The SL-MB2600 range are 2600mm diameter and are rotationally-moulded from UV-stabilised virgin polyethylene to a 18mm wall thickness. They are foam filled with closed-cell polyurethane to prevent water ingress in the unlikely event of damage to the outer layer.
The mooring tube is not moulded into the buoy but slides into a tubular section that runs down the centre of the buoy enabling the tube to be replaced at any stage during the product service life.
Sealite’s mooring buoys are capable of supporting substantial loads, and are available in a range of colours for clear visibility. The large galvanised mooring tube will accept large links of mooring chain.
